Join to our channels: new products, coupons, best deals:
Flight controllers
JHEMCU F7 XSD Pro Full Deluxe
Multirotors → FPV Racing drones → Flight controllers → F7 FCs → JHEMCU F7 XSD Pro Full Deluxe
| MCU: | F722 |
| Gyro: | MPU6000 |
| Barometer: | BMP280 |
| OSD: | + |
| Power : | 2-6S |
| 3.3V BEC: | + |
| 5V BEC: | 3A |
| 9V/10V BEC: | 2A |
| Current Sensor: | - |
| ESC: | - |
| UART Rx: | 6 |
| UART Tx: | 6 |
| Buzzer pad: | + |
| LED pad: | + |
| CURR pad: | + |
| Blackbox: | 16Mb |
| USB: | Type C |
| DJI compatible: | + |
| Size: | 27x27mm |
| Mount Holes: | 20x20mm |
| Weight: | 4.7g |
CPU: STM32F722
Power supply: 2-6S (2S power supply cannot output 10V, 5V can)
Signal protocol: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600.
Sensor: MPU6000
Size: 27*27mm (20mm mounting hole, diameter 3MM)
Firmware version: Betaflight JHEF7DUAL
Black box: 16MB for the full version, not for the lite version
Barometer: the full version supports BMP280, the simplified version does not
OSD: Support
DJI VTX: There are reserved interfaces and wiring, support
USB: TYPE-C interface
IIC: Support
UART: 6 channels, UART2: receiver, UART1, 2, 3, 4, 5, 6,
BEC: BEC 5V/3A and 10V/2A
DJIVTX: Support, reserved special socket, equipped with plug wire.
Receiver: SBUS, IBUS, DSM2/X, TBS, etc.
Support WS2812 programmable LED
Support buzzer
Built-in voltage sensor, socket reserved for current meter interface
Weight: 4.7 grams
Share
Prices for JHEMCU F7 XSD Pro Full Deluxe in stores
Deals found: 50 (AliExpress2)
| Store | Stock level | Lot price | Shipping cost | Coupon / promocode | Pcs./lot | 1pc price |
| AliExpress | Stock level: 3 | $52 | 1 | $52 | ||
| AliExpress | High stock level | $69 | 1 | $69 |
See also
JHEMCU F7 XSD Pro Standart Acro Lite
$64
JHEMCU F7 XSD Pro Deluxe + EM-20A 2-6S BLHeli_S 4in1 ESC
$66
Join to our channels: new products, coupons, best deals: